6,50 € excl. VAT
Epoxy Filler And Profiler For Surface Repair and Preparation
In stock
EcoTrowel is a high performance epoxy filler and profiling product formulated for surface repair and preparation. It is easy to mix and spread, and has a peanut-butter like consistency (contains no peanuts!).
EcoTrowel is lightweight and suitable for an infinite variety of composite, architectural, industrial, and art-related applications. It can be applied to wood, concrete – even canvas – to a thickness of 1” without sagging or slumping. It can be easily sanded, shaped, drilled, tapped, machined, routered & remains durable for life.
100% Waterproof, Chemical Resistant, Impact Resistant, and High Adhesion
Low Odor, Low VOC’s, Non Toxic
Superior strength and flexibility
Can be primed and coated
No shrinking when cured
Spreads easily and remains in place
Won’t sag, drag or pull
2.5:1 by weight
20 minutes depending on ambient temperature
From feathered edge up to 0.5″ (1.3cm) (It’s fine to fill cracks up 1” wide)
15-30℃ (60-90℉)
48 hours at 21℃ (70℉) and 50% relative humidity
6-8 hours depending on ambient temperature, humidity and thickness
6-8 hours minimum depending on ambient temperature, humidity and thickness
24 hours depending on ambient temperature, humidity and thickness
10-25℃ (50-77℉)
Wipe tools and spills with a clean rag and Isopropyl/Denatured Alcohol or warm soapy water.
Remove all dust and any loose debris from cracks or surface used compressed air or a vacuum cleaner.
Stir the contents of Part A (Resin pail) for 30 seconds. Pour the entire contents of part B (Hardener Jug) into Resin Pail, and mix thoroughly with a power-mixer for about 2.5 minutes until color and texture are consistent throughout the batch. Apply using a trowel or spreader. Once mixed, the epoxy hardens quickly, leaving you approximately 15 minutes of working time.
In a clean, dry container, mix (by weight) 2.5 parts resin with 1 part hardener.
Using a trowel or putty knife, begin applying to the prepped surface immediately after mixing.
Between 6 – 24 hours providing the previous layer is firm but still tacky. Once tack-free it is necessary to sand between layers to ensure proper adhesion.
Epoxy has a shelf life of about 2 years providing it is properly stored in sealed containers.
| Dimensions | 12 × 7 × 2 cm |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.